"connector", "terminal block", and "connector" are different forms of application that belong to the same concept, and are commonly referred to according to different practical applications.
Terminal refers to a type of connecting component in electronic and electrical components, which connects conductors to receiving terminals in equipment or cables. Usually includes a set of metal bars that can provide wire connections for input, output, power, and ground. Due to its crucial role in circuit connections, it has a wide range of applications.
Connectors are important components in electronic devices, mainly used to connect different parts of electronic devices. Its working principle is to connect the wires in two electronic devices together, allowing electrons in the electronic devices to circulate between the two devices.
The connector is a component that our electronic engineering technicians often come into contact with; Its function is very simple: to establish a communication bridge between blocked or isolated circuits in the circuit, allowing current to flow and enabling the circuit to achieve its intended function.
A connector is an electronic component used to connect circuits, typically used for circuit connections in electrical and electronic devices. It achieves connection and disconnection between different circuits through the connection method of plugs and sockets.A connector usually consists of three parts: a plug, a socket, and a housing.
As the main link for current and signal transmission in automotive wiring harnesses, the reliability of transmission between connectors directly determines the effectiveness of current and signal transmission. This article will start with several forms of connector failure, classify and introduce common types of connector failure, as precautions when selecting connectors.
Car wiring harness is the central nervous system used to connect car circuits, serving as a transmission carrier for various energy and signals.
The main electrical properties of connectors include contact resistance, insulation resistance, and electrical strength.
Connectors are used to connect the sub parts of a circuit together. Usually, when using connectors, it may be necessary to disconnect the sub parts under specific circumstances, such as power input and output. The disconnection and connection with the circuit board, the insertion of headphones, and so on are all considered connectors.
Automotive connectors are widely used connectors, and automotive circuits are closely related to them, from engine modules to camera modules. Its function is to connect circuits and build bridges for communication.
It should be noted that all visible items should be inspected. For example, checking whether the product size meets the requirements; Whether the wrong materials are used, and whether there is excessive or insufficient use; Check the surface of wires and connectors for scratches, stains, burrs, deformations, gaps, and other defects; Whether the connector fixing parts are missing and whether the shell assembly is in good condition; Whether the content of the label is correct and clear; Whether the position and direction of the label are correct; Whether the terminal is in a good pressed state, whether there is any missing or incorrect insertion, and whether the insertion is in place; Whether the crimping condition of the cable is good; Whether the shrinkage of the heat shrink tube is good, and whether the shrinkage position and size are correct; Check if the specifications, quantity, and position of the tie are correct and if there are any drops.
Connectors are essential components in electronic devices, and when observed along the path of current flow, you will always find one or more connectors. The form and structure of connectors are ever-changing, and there are various forms of connectors depending on the application object, frequency, power, application environment, etc.
