1-0963736-1 1-963736-1 Suitable Crimping Terminals For Automotive Connector Plugs

2.1 The causes of the faulty of the line beam and the common car line failures are: poor contact contacts, short circuit and disconnection between the wires, etc.

The reason for the faulty king:

(1) Natural factors

The duration of the wire beam is very long, the wires are aging, the insulation layer is damaged, and the mechanical strength does not meet the standards, resulting in a short -circuit and disconnection between circuits and burning the wire beam. Electric equipment cannot work normally. Many situations are caused by poor contact. Many causes of reasons are oxidation and deformation of the cable beam.

(2) The fault of the device causes damage to the cable beam. The failure of the electrical equipment can easily cause damage to the cable beam. Common faults include short circuit, new roads, and so on.

(3) Causes of subjective people

When assembling or maintenance of car parts, metal objects will be injured to break the cable beam to break the wiring beam insulating layer; improper position of the wiring beam; If the wires are connected or scissored by the wires, it may affect the electrical equipment and even burn the wire beam.

2.2. Judgment line beam line failure

The first is the burning of the wire. This situation is relatively sudden and fast. In these lines, the insurance device is generally not available. In the line, wherever the iron is, the wire bundle will be burned. At the same time, present a certain rule. If the wire bundle of the electrical equipment is burned out, then the electrical equipment is faulty.

The second is the short circuit, interruption, and poor contact between the lines. The cable beam is squeezed and impacted by the outside, causing damage to the insulating layer of the wire in the line, causing the short circuit between the wires, and the discharge of certain electrical equipment and the fuse melting. During the judgment, the wire beam plug that can be disassembled and the control switch can be disassembled, and the short circuit of the line is used by a meter or testing to detect the line.

Simple instructions：

We have product Catalogue，please contact us on skype，WhatsApp or Email.

If you can't find a product on our website or catalog, We deal with over 10,000 items, our catalog doesn’t cover all products. And we are developing 100+ molds yearly, which means around 10 new products are created in our factory. So don’t go away, just send us your photo or part no, we’ll check for you.