2 pin 6185-0867 PB295-02120 Auto Waterproof Electric Connector Fog Lights Socket Plug For 2.2 Series

1.Cabin cleaning
Cleaning in the engine room: When cleaning the engine room, it should be carried out 10 minutes after turning off the ignition switch. There are a lot of high-voltage equipment in the engine room, such as chargers, high-voltage controllers, and high-voltage harness plugs. It is forbidden to open the engine compartment cover for washing, otherwise the connectors of high-voltage components will be damp, resulting in insulation failure of the vehicle and making it impossible to drive, as shown in Figure 1 -28 shown. Note: Do not use wet cloth to touch high-voltage components when wiping. When it is necessary to clean the cabin, try to operate with one hand and do not hold the body. If rust is found when checking the line plug part, it should be treated with professional cleaning agent
2.Electric vehicle power battery connection method
In order to increase the battery capacity, multiple monomers need to be connected in parallel. Usually, several monomers with the same capacity and performance parameters are connected in parallel by laser welding to form a basic module. For example, 3 soft pack monomers are connected in parallel. Of course, more The monomers are connected in parallel, such as 5P, or even 16P.
In order to increase the battery voltage, multiple cells need to be connected in series, so several basic modules are connected in series by laser welding to form a module, for example, two 3P basic modules are connected in series to form a 3P2S (Series) or three 3P basic modules are connected in series to form a 3P3S battery module . At the same time, in order to facilitate the arrangement in the power battery, there are many options for the combination of modules: one 3P2S module can be used alone, and other electrical components can be arranged on the battery; two 3P2S modules can also be stacked in series to form a 3P4S; 1 3P2S and 1 3P3S are stacked to form 3P5S. A variety of combinations are fixed on the bottom plate of the power battery in an orderly manner, which facilitates the overall layout.

Simple instructions：

We have product Catalogue，please contact us on skype，WhatsApp or Email.

If you can't find a product on our website or catalog, We deal with over 10,000 items, our catalog doesn’t cover all products. And we are developing 100+ molds yearly, which means around 10 new products are created in our factory. So don’t go away, just send us your photo or part no, we’ll check for you.