334680003 33468-0003 SOCKET 18-20AWG CRIMP GOLD Power Terminal Connector

Integrating the fully automatic pressure pickup to the production of pre -installed components, it has significantly increased productivity and reduced costs. These machines can handle the length of the wires with a long wire for multiple functions, including dual -pressure connections (two wires on one terminal), even if there is an automated machine for ultrasonic welding, it needs to be used in practice. Types of stitching, and these stitching cannot be performed in the automatic process. This is the main reason why ultrasonic welding is still realized by the operator's use of ultrasonic welding machines.

Heat shrinking into the work section: The thermal shrinkage tube is used on the wire, which is usually used to protect the connector and pressure connecting area (especially on the wire with a large cross section). This type of work segment is simpler than other types of construction segments. The operation to be performed is very simple, but it must be carefully operated to avoid damaging the equipment area. The operator puts the tube into the wire/connector and places it on the top of the hot air.

2 component and pre -installed component testing phase

Before verifying the use of a part of the line beam, the manufacturer will perform the necessary tests to determine whether the component is the quality standard that meets the requirements. Testing is performed in the test center. This is a area designed for this purpose. Here is the durability test of various corrosive factors of the wires, connectors, and pressure-connecting terminals-wire combinations.

Test types performed by the test center:

Drag chain test,

Tired test, test,

Bend test,

Burning test,

Jiejiecai test.

At the beginning of each production cycle, the representative samples of the joints (ultrasonic welding) and the overall line of the connector will be performed and the micro -quality inspection will be performed to ensure that the parameters of semi -automatic and automatic machine settings are consistent. Required quality standards.

Simple instructions：

We have product Catalogue，please contact us on skype，WhatsApp or Email.

If you can't find a product on our website or catalog, We deal with over 10,000 items, our catalog doesn’t cover all products. And we are developing 100+ molds yearly, which means around 10 new products are created in our factory. So don’t go away, just send us your photo or part no, we’ll check for you.