7165-0432 Automotive Wire Harness Connector Waterproof Silicone Plugs

The design specifications include: 370 electrical appliances, 374 body wire beam, 362 chassis wire beam; chassis lines include frame wiring 1, frame wire beam 2, engine wiring, transmission wire beam, flip mechanism wiring, starting motor power line, battery line wire wire, battery line wire wire, battery line wire wire, battery wire wire , Rub iron, etc.

GB 7258-2012 "Technical Conditions for Motor Vehicle Operation Safety" Regulations 8.6.2 The following contents are specified in the electrical wire beam: the electrical wire should be flame retardant, the beam in the passenger engine cabin and other thermal sources shall use the temperature resistance of not less than 125 ℃, not less than 125 ℃ In other parts of flame retardant wires, other parts of the wires should use flame-retardant wires with a temperature resistance of not less than 105 ° C, and the flame retardant performance of the ripple tube should meet the V-0 requirements in Table 1 in Table 1 in GB/T 2408-2008. Benefront, neatly arranged, fixed card tightly, firmly linked, and installed insulating sleeves at the connector. When crossing the hole through the hole, the flame retardant wear -resistant insulation sleeve should be installed. The original electrical appliances should be reliable. It has waterproof requirements.

The body part includes the main line beam assembly of the body, the cable beam assembly of the cabinet of the cab, and the left/right door beam assembly (with electric doors and windows). Among them, the main functional parts of the main line beam assembly of the body include instrument, relay and insurance, some switches and front lamps; Switching, etc.; The main functional parts of the left/right door beam assembly include motor and rearview mirror heating.

The chassis part includes the front frame wire beam assembly, the rear rack beam assembly, the engine pre-installed wire beam (non-country IV model), the flip mechanism wiring, the transmission line beam, and the power cord (battery-to the frame).

Simple instructions：

We have product Catalogue，please contact us on skype，WhatsApp or Email.

If you can't find a product on our website or catalog, We deal with over 10,000 items, our catalog doesn’t cover all products. And we are developing 100+ molds yearly, which means around 10 new products are created in our factory. So don’t go away, just send us your photo or part no, we’ll check for you.