RS220-04100 Connector Waterproof Plug Cavity Seal Waterproof Plugging

2 Low -voltage beam production process process and requirements

1) Circuit cutting and wire marking (wire number). Among them, the wire cut is based on the batch nature of the cutting marker of the wire (according to the number of models of the production plan). The wire marking (wire number) is based on the wire detail table according to the technical requirements.

Process requirements: The length of the wire cutting is suitable for the terminal length of the terminal. After cutting, the insulation peel is not damaged or fractured in the inside of the inside of the inside.

2) Separation. After the wires of the same line number are cut, each wire is divided into a set of wire beams.

Process requirements: After straining the wires of the same line number, they are packed with a split -line workplane board. The wires that form the beam are placed on the phenomenon of the line frame, and the logo is smooth, the wiring beam is smooth, no twisting, messy and other phenomena.

3) Cut the ripples, heat pipes, and glue heat pipes. The wavelet tube is cut with scissors according to the specifications and lengths of the process requirements. The thermal shrinkage and the heating tube with the tube of the tube are cut according to the specifications and lengths of the process, and the automatic computer cutting machine is cut for cutting.

Process requirements: The ripple tube, thermal shrinkage, and the glue thermal shrinkage tube are cut according to the prescribed size.

Simple instructions：

We have product Catalogue，please contact us on skype，WhatsApp or Email.

If you can't find a product on our website or catalog, We deal with over 10,000 items, our catalog doesn’t cover all products. And we are developing 100+ molds yearly, which means around 10 new products are created in our factory. So don’t go away, just send us your photo or part no, we’ll check for you.